yiboluo
0551-63710328
butterfly valve
Pneumatic hard seal pair butterfly valve
Product model: D643H
Nominal diameter: DN50~DN1200
Nominal pressure: 1.0MPa~1.6MPa
Connection method: clip type
Material: WCB, stainless steel
Applicable temperature: -40~+425°C
Applicable medium: gas, water oil, etc. (high temperature occasion)
Pneumatic actuator: double acting, single acting
Uses: Used to cut or adjust various corrosive and non-corrosive media
Pneumatic hard seal pair butterfly valve product overview
The pneumatic hard sealing butterfly valve adopts a three-dimensional eccentric structure, and the butterfly plate is a soft and hard laminated metal sheet, which has the double advantages of a metal hard seal and an elastic seal. It has a two-way sealing function, is not limited by the flow direction of the medium during installation, and is not affected by the position of the space, and can be installed in any direction. Pneumatic hard seal butterfly valves are widely used in metallurgical, electric power, petroleum, chemical and other industrial pipelines with medium temperature ≤ 425 °C to regulate flow and cut off fluids.
Pneumatic hard seal pair butterfly valve features
1, metal seal can be applied to media with a little particles, slurry
2, the applicable temperature can reach 425 ° C
3, almost no friction when sealing, to ensure less torque, better sealing
4, flange to the pinhole connection for a variety of standards
Pneumatic hard seal pair butterfly valve actuator
The new series of GT-type pneumatic actuators are double-acting and single-acting (spring-return), gear transmission, safe and reliable; large-diameter valves adopt series AW pneumatic actuator fork-type transmission, with reasonable structure and large output torque. There are double acting and single acting.
1. Gear type double piston, large output torque and small volume.
2. The cylinder is made of aluminum and gold materials, which is light in weight and beautiful in appearance.
3. Manual operation mechanism can be installed at the top and bottom.
4. The rack-and-pinion connection can adjust the opening angle and rated flow.
5. The actuator can be equipped with electric signal feedback indication and various accessories for automatic operation.
6, IS05211 standard connection provides convenience for the installation and replacement of the product.
7. The joint screws adjusted at both ends can make the standard product have an adjustable range of ±4° at 0° and 90°. Ensure synchronization with the valve.
Pneumatic hard seal pair butterfly valve technical parameters and performance
GTD/ATDTechnical parameters of pneumatic actuators |
Pneumatic seal butterfly valve parameters |
||
Types of |
Double-acting piston, spring return |
Nominal diameter |
DN50~400mm |
Air pressure |
Double acting:2-8bar/Single acting:4-8bar |
Nominal |
PN1.6、2.5MPa |
Output torque |
Double acting:4N·M~10560N·M |
Valve shaft material |
Carbon steel、304/316/316Lstainless steel |
Single acting:N·M~2668N·M |
Body material |
Carbon steel, alloy steel, stainless steel |
|
Operating temperature |
Normal temperature: -20 ℃ ~ 80 ℃ (nitrile rubber O-rings) |
Stem material |
Carbon steel, alloy steel, stainless steel |
High temperature: -20 ℃ ~ 160 ℃ (Viton O-ring) |
Seating |
stainless steel |
|
Range of motion |
0~90°±5° |
structure type |
Three-dimensional eccentric |
Connection thread |
GTD40~GTD83/ATD50~ATD88 G1/8″ |
temperature |
≤425℃ |
GTD110~GTD350/ATD100~200 G1/4″ |
Applicable medium |
Water, air, natural gas, oil and weak corrosive fluid |
|
Valve position signal |
Locator: 4 ~ 20mA / reply is: fully open fully closed signal |
Feature |
Zero leakage, long life, easy to install, high temperature high pressure |
Nominal diameter(mm) |
Size(mm) |
||||||
L |
L1 |
H |
1.6Mpa |
2.5Mpa |
|||
D1 |
4-Φd |
D1 |
4-Φd |
||||
50 |
43 |
108 |
245 |
125 |
4-18 |
125 |
4-18 |
65 |
46 |
112 |
250 |
145 |
4-18 |
145 |
4-18 |
80 |
46 |
114 |
350 |
160 |
4-18 |
160 |
4-18 |
100 |
52 |
127 |
380 |
180 |
4-18 |
190 |
4-22 |
125 |
56 |
140 |
410 |
210 |
4-18 |
220 |
4-26 |
150 |
56 |
140 |
490 |
240 |
4-22 |
250 |
4-26 |
200 |
60 |
152 |
560 |
295 |
4-22 |
310 |
4-26 |
250 |
68 |
165 |
621 |
355 |
4-26 |
370 |
4-30 |
300 |
78 |
178 |
680 |
410 |
4-26 |
430 |
4-30 |
350 |
78 |
190 |
757 |
470 |
4-26 |
490 |
4-33 |
400 |
102 |
216 |
825 |
525 |
4-30 |
550 |
4-36 |
450 |
114 |
222 |
925 |
585 |
4-30 |
600 |
4-36 |
500 |
127 |
229 |
1010 |
650 |
4-33 |
660 |
4-36 |
600 |
154 |
267 |
1180 |
770 |
4-36 |
770 |
4-39 |
casemore>>
Qingdao project site picture
Shanghai material company project site picture
Sichuan environmental protection company project site picture
Jiujiang a new material company project site picture
Shanxi provincial chemical company project site picture
Site map of an environmental protection company in Anhui
yiboluo
0551-63710328
product center
customer case
technology
contact us
©2015-2019 Hefei proliferation bo luo industrial control equipment co., LTD
Anhui ICP for 13007160-2